Road Bike Brake Hood Covers: When to Replace Them and Which Shimano Bracket Cover Fits (India)

Sticky, torn or loose brake hoods? How to tell when road bike hood covers need replacing, how to match the Shimano lever model and what they cost in India.

Shimano bracket cover replacement brake hood for ST-R8000 and ST-R7000 road levers

Road bike brake hood covers: when should you replace them?

Road bike brake hood covers are the rubber sleeves that wrap your brake-shift levers, and they are where your hands spend most of every ride. Shimano calls them bracket covers. Heat, sweat, sunscreen and UV break the rubber down over time, and Indian summers speed that up. The good news is that replacements are inexpensive: genuine Shimano covers on InstaSport run from ₹310 to ₹1,550. The catch is that every lever model needs its own cover, so this guide shows how to identify yours.

Signs your hood covers need replacing

  • The rubber feels sticky or tacky even after washing.
  • Cracks or tears appear, often where the thumb or palm rests.
  • The cover has stretched and slides or twists on the lever body.
  • The surface has gone hard, shiny and slippery when wet.
  • You can see the lever body or internals through a split. Replace promptly in this case, because the cover also keeps water and grit out of the mechanism.

Why do brake hoods turn sticky?

Hood rubber softens as its compounds break down with heat, UV light and contact with skin oils and sunscreen. Bikes stored on balconies or near windows suffer most. Cleaning with mild soap and water helps a little, but once the rubber has degraded it will not recover. Avoid solvent cleaners and degreasers on the hoods, since they accelerate the damage.

How to find your Shimano lever model

Peel the front edge of the hood back and look at the lever body or the inside of the clamp band. You will find a code starting with ST, such as ST-R7000 or ST-R8020. That code, not the groupset name, decides which cover fits. Mechanical rim-brake, hydraulic disc and Di2 levers in the same groupset family have different shapes, so a 105 cover for a rim-brake lever will not fit a 105 hydraulic lever.

Which Shimano bracket cover fits which lever?

Lever modelSeriesPrice
ST-R3000 / R3030 / R2000 / R2030Sora and Claris₹470
ST-R8000 / ST-R7000Ultegra and 105 mechanical₹650
ST-R7020105 hydraulic disc₹310
ST-R8020Ultegra hydraulic disc₹720
ST-R8170Ultegra Di2 12-speed₹980
ST-R9150Dura-Ace Di2₹1,150
ST-R9170Dura-Ace Di2 hydraulic₹1,550

Check the sales unit on each product page to confirm whether the listing is a left-right pair.

How to fit new hood covers

On many levers you can roll the old cover forward and pull it off over the lever blade without disturbing cables, then work the new one on from the front. A little soapy water or isopropyl alcohol on the inside helps it slide and dries without residue. Seat the locating tabs into their slots on the lever body and smooth the rear edge over the bar tape. If the cover will not pass over the blade, the lever may need to come off the bar, which means re-wrapping tape; a shop can do this quickly.

How long should hood covers last?

There is no fixed interval. Riders who train year-round outdoors often replace hoods every two to three years, while a bike stored indoors can go much longer. A sensible habit is to inspect them whenever you change bar tape and replace both at the same time, since the tape has to be partly unwrapped anyway. Fresh hoods and tape make an old bike feel new for a modest outlay.

Shop the gear

Frequently asked questions

Are Shimano brake hood covers interchangeable between models?

No. Each lever model has its own shape, so you need the bracket cover made for your exact ST model number. Mechanical, hydraulic and Di2 levers from the same groupset use different covers.

Why are my brake hoods sticky?

The rubber breaks down with heat, UV exposure, sweat and sunscreen. Once it turns tacky it cannot be restored, so replacement is the fix.

How much do replacement hood covers cost in India?

Genuine Shimano bracket covers on InstaSport currently range from ₹310 to ₹1,550 depending on the lever model. Check the product page for the current price and sales unit.